EHD DTHR 300
- 6" Dia bore holes to a depth of 300mtrs (1000fts).
- Truck mounted rig with power from truck engine through transfer gear box.
- Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam.
- Drilling by drag bit roto percussion with DTH Hammer.
Specifications
| Diameter | : | 6 1/2" bore hole | |
|---|---|---|---|
| Depth | : | 363mtrs | |
| Application | : | Water Well Drilling Rig | |
| Formation | : | Soft / Hard | |
| Prime Mover | : | Truck mounted rig with power from truck engine. | |
| Mounting | : | The Rig unit is mounted on a suitable truck. | |
| Mast | : | Channel type structure max capacity - 20tons(44,000lbs), height - 8mtrs (27fts), Rod handlingcapacity - 20fts. | |
| Pull Up Speed | : | 39mtrs / min. | |
|---|---|---|---|
| Pull Up Force | : | 10000kgs | |
| Pull Down Speed | : | 58mtrs / min. | |
| Pull Down Force | : | 7300kgs | |
| Hydraulic System | : | 210kgs / cm2 / (3000psi). | |
| Jacks | : | Four Hydraulic Jack. | |
| Compressor | : | 1100 CFM 300 PSI / 1200 CFM 330 PSI. | |